Loading... Please wait...

Hover over image to zoom

  • Image 1
  • Image 2

3020 Apex 308 DPMS Barrel Nut


Product Description

Apex 308 DPMS Barrel Nut fits our Apex 308 DPMS MID, RIFLE & EXTENDED RIFLE MODELS.

The Apex 308 DPMS barrel nut is a high-quality replacement for OEM barrel nuts.

The Apex 308-barrel nut fits the DPMS/MEGA/Knights pattern 308 size AR upper receivers.


 1.4375" x 16 Thread
OD: 1.539"
Length: 1.0625"
Weighs .736 oz.
Manufactured with the highest standards for fit and finish
• Made from heat-treated alloy steel
• Black nitride coated for corrosion resistance
 Barrel Nut Wrench available thru PRI. Item# 03-0085C, ArmaLite 308 Combo Barrel Nut Wrench
 100% Made in the USA

 Product Reviews

Write review

  1. Worked great

    Posted by Bill on 8th Feb 2021

    It’s a barrel nut. No issues torquing it on, wrench grabbed it tightly, no slipping or marring. Fit well with apex hand guard. Project done!!!

  2. Quality Product

    Posted by Unknown on 9th Dec 2017

    Hard to review a barrel nut! Top quality, perfect finish.

  3. Perfect - look no further...

    Posted by Steve on 1st Apr 2017

    These are really nice - nitride finish is excellent!! Apex customer service is without equal...A++++++++++++++++++++++++++++++++++++++++++++

  4. Quality

    Posted by Steve on 31st Mar 2017

    Nitride barrel nut - as good as you will find - no need to look elsewhere

  5. High Quality

    Posted by Roger Peterson on 16th Oct 2015

    Was as good better that original.

  6. Solid!!!

    Posted by Alan Carter on 18th Jun 2015

    Now this is a barrel nut. Solid, smooth, well made and a perfect fit.

    Highly recommend for your Apex forend install.

    A+ product!

  7. High Quality Barrel Nut

    Posted by Mark WP on 13th Feb 2015

    Threaded on to the upper with very little play. The machining was very clean and well executed. Finish was flat black as show. A very slight groove had to be filed into the ridges on the barrel nut to allow the gas tube to slide into the upper. This is also true with a factory DPMS barrel nut, so no big deal. Fits great, well machined, properly hardened - what else do you need?

  8. SR-25 (Knights)

    Posted by JDP on 29th Jan 2015

    I found this part to fit extremely well with a Rainer barrel and Knights SR-25 upper (also used a APEX 2360 AR10/308 DPMS 15.0" Ext. Rifle Length, 12.7 oz Hand guard)

  9. well done

    Posted by mike on 22nd Dec 2014

    Mated up perfectly with my dpms upper. Very nicely done.

  10. Nice product

    Posted by Rob T on 16th Apr 2014

    I only bought this because I didn't want to cut the delta ring off my stock one. Installed it on my S&W M&P 10, worked perfectly, nice high quality product.

        Call us: 541-826-3713        Contact Us        Shipping & Returns        Privacy

Click the button below to add the 3020 Apex 308 DPMS Barrel Nut to your wish list.